Cactus Micro Rev2
(Part no : AR-0015)
- Arduino compatible with ESP8266 wifi module
- On-Board micro-USB connector for programming
- 4 x 10-bit ADC pins / 12 x Digital I/Os (5 are PWM capable)
- WIFI/micro-USB/ Serial/ I2C/ SPI
product wiki
Price : 27,000kyats
(Part no : AR-0015)
- Arduino compatible with ESP8266 wifi module
- On-Board micro-USB connector for programming
- 4 x 10-bit ADC pins / 12 x Digital I/Os (5 are PWM capable)
- WIFI/micro-USB/ Serial/ I2C/ SPI
product wiki
Price : 27,000kyats
Gboard
(Part no : AR-0014)
- Arduino with GPS/GPRS module
- Program through USB to serial comverter
- Also provide connector for wireless XBee and nRF24L01+
- Complete board for home automation or remote monitoring
Price : 51,500kyats
(Part no : AR-0014)
- Arduino with GPS/GPRS module
- Program through USB to serial comverter
- Also provide connector for wireless XBee and nRF24L01+
- Complete board for home automation or remote monitoring
Price : 51,500kyats
Arduino Pro Mini + USB To Serial bundle
(Part no : AR-0013)
- Combination of Arduino Pro Mini and USB to serial converter
- Good price for beginner
- 2 versions : 5V and 3.3V (Please state in your order)
Price : 9,000kyats
(Part no : AR-0013)
- Combination of Arduino Pro Mini and USB to serial converter
- Good price for beginner
- 2 versions : 5V and 3.3V (Please state in your order)
Price : 9,000kyats
Arduino ADK REV3
(Part no : AR-0012)
- ATmega2560
- Operating voltage : 5V
- Input voltage (recommended) : 7-12V
- Input voltage (limits) : 6-20V
- Digital I/O pins : 54 (of which 15 provide PWM output) / Analog input pins : 16
- DC current per I/O Pin : 40 mA / DC current for 3.3V Pin 50 mA
- Flash memory 256 KB of which 8 KB used by bootloader
- SRAM : 8 KB
- EEPROM : 4 KB
- Clock speed 16 MHz
(Same as Arduino Mega 2560 but it has a USB host interface to connect with Android based phones, based on the MAX3421e IC)
detail on this link.
Google ADK link
Price : 67,000 kyats
(Part no : AR-0012)
- ATmega2560
- Operating voltage : 5V
- Input voltage (recommended) : 7-12V
- Input voltage (limits) : 6-20V
- Digital I/O pins : 54 (of which 15 provide PWM output) / Analog input pins : 16
- DC current per I/O Pin : 40 mA / DC current for 3.3V Pin 50 mA
- Flash memory 256 KB of which 8 KB used by bootloader
- SRAM : 8 KB
- EEPROM : 4 KB
- Clock speed 16 MHz
(Same as Arduino Mega 2560 but it has a USB host interface to connect with Android based phones, based on the MAX3421e IC)
detail on this link.
Google ADK link
Price : 67,000 kyats
Arduino UNO Rev3
(Part no : AR-0003)
- ATmega328
- Operating voltage : 5V
- Input voltage (recommended) : 7-12V
- Input voltage (limits) : 6-20V
- Digital I/O pins : 14 (of which 6 provide PWM output) / Analog input pins : 6
- DC current per I/O Pin : 40 mA / DC current for 3.3V Pin 50 mA
- Flash memory 32 KB of which 0.5 KB used by bootloader
- SRAM : 2 KB
- EEPROM : 1 KB
- Clock speed 16 MHz
detail on this link.
Price : 8,000 kyats
(Part no : AR-0003)
- ATmega328
- Operating voltage : 5V
- Input voltage (recommended) : 7-12V
- Input voltage (limits) : 6-20V
- Digital I/O pins : 14 (of which 6 provide PWM output) / Analog input pins : 6
- DC current per I/O Pin : 40 mA / DC current for 3.3V Pin 50 mA
- Flash memory 32 KB of which 0.5 KB used by bootloader
- SRAM : 2 KB
- EEPROM : 1 KB
- Clock speed 16 MHz
detail on this link.
Price : 8,000 kyats
Arduino Mega2560 R3
(Part no : AR-0008)
- ATmega2560
- Operating Voltage : 5V
- Digital I/O Pins : 54
- PWM Channels :14
- Flash Memory 256 KB of which 8 KB used by bootloader
- SRAM 8 KB
- EEPROM 4 KB
- Clock speed 16 MHz
- Price : 23,500 kyats
(Part no : AR-0008)
- ATmega2560
- Operating Voltage : 5V
- Digital I/O Pins : 54
- PWM Channels :14
- Flash Memory 256 KB of which 8 KB used by bootloader
- SRAM 8 KB
- EEPROM 4 KB
- Clock speed 16 MHz
- Price : 23,500 kyats
Arduino Pro Mini 328 - 5V/16MHz
(Part no : AR-0002)
- ATmega328 running at 16MHz with external resonator (0.5% tolerance)
- Over current protected
- Weighs less than 2 grams
- DC input 5V up to 12V
- On board Power and Status LEDs
- Analog Pins: 8
- Digital I/Os: 14
- Need (USB 2 Serial Converter) for programming
detail on this link.
Price : 5,500 kyats
(Part no : AR-0002)
- ATmega328 running at 16MHz with external resonator (0.5% tolerance)
- Over current protected
- Weighs less than 2 grams
- DC input 5V up to 12V
- On board Power and Status LEDs
- Analog Pins: 8
- Digital I/Os: 14
- Need (USB 2 Serial Converter) for programming
detail on this link.
Price : 5,500 kyats
USB 2 Serial Converter
(Part no : AR-0005)
- USB connection into 5 volt TX and RX that you can connect straight to the Arduino
detail on this link.
Price : 17,700 kyats
(Part no : AR-0005)
- USB connection into 5 volt TX and RX that you can connect straight to the Arduino
detail on this link.
Price : 17,700 kyats
USB To Serial
(Part no : AR-0006)
- another USB to serial converter
- use FTDI chip
- could be used to program Arduino Pro mini
Price : 4,500 kyats
(Part no : AR-0006)
- another USB to serial converter
- use FTDI chip
- could be used to program Arduino Pro mini
Price : 4,500 kyats
iBoard
(Part no : AR-0010)
- Arduino compatible (ATMega328P on board)
- support POE (power on Ethernet)
- support MicroSD, Xbee, nRF24L01 (modules not included)
- need USB to serial unit (AR-0006) or similar to program
Schematic on this link.
Price : 23,500 kyats
(Part no : AR-0010)
- Arduino compatible (ATMega328P on board)
- support POE (power on Ethernet)
- support MicroSD, Xbee, nRF24L01 (modules not included)
- need USB to serial unit (AR-0006) or similar to program
Schematic on this link.
Price : 23,500 kyats
Arduino Yun
(Part no : AR-0011)
- combination of Arduino Leonardo with a Wifi system-ona-chip running Linino (a MIPS GNU/Linux based on OpenWRT)
- ATmega32u4 and Atheros AR9331
- built-in Ethernet and WiFi support
- USB-A port, micro-SD card slot,
- 20 digital input/output pins (7 can be used as PWM outputs and 12 as analog inputs),
- 16 MHz crystal oscillator
- micro USB connection
- ICSP header, and a 3 reset buttons
Detail on this link.
Price : 103,000 kyats
(Part no : AR-0011)
- combination of Arduino Leonardo with a Wifi system-ona-chip running Linino (a MIPS GNU/Linux based on OpenWRT)
- ATmega32u4 and Atheros AR9331
- built-in Ethernet and WiFi support
- USB-A port, micro-SD card slot,
- 20 digital input/output pins (7 can be used as PWM outputs and 12 as analog inputs),
- 16 MHz crystal oscillator
- micro USB connection
- ICSP header, and a 3 reset buttons
Detail on this link.
Price : 103,000 kyats