Jlink V8(China clone)
(Part no : T-0013)
- support ARM7 ARM9 ARM11 Cortex-M3 core
- Support for ADS, IAR, KEIL, WINARM, REALVIEW almost all of the development environment
- Download speeds of up to ARM7: 600kB/s, ARM9: 550kB/s, through the DCC up to 800 kB/s
- Target board voltage range 1.2V-3.3V, 5V compatible
Price : 15,000 kyats
(Part no : T-0013)
- support ARM7 ARM9 ARM11 Cortex-M3 core
- Support for ADS, IAR, KEIL, WINARM, REALVIEW almost all of the development environment
- Download speeds of up to ARM7: 600kB/s, ARM9: 550kB/s, through the DCC up to 800 kB/s
- Target board voltage range 1.2V-3.3V, 5V compatible
Price : 15,000 kyats
ST-LINK/V2 (China clone)
(Part no : T-0012)
- 5V power supplied by a USB connector
- support STM8 and STM32 microcontroller families
- support both single wire interface module (SWIM) and JTAG/serial wire debugging (SWD)
Price : 7,000 kyats
(Part no : T-0012)
- 5V power supplied by a USB connector
- support STM8 and STM32 microcontroller families
- support both single wire interface module (SWIM) and JTAG/serial wire debugging (SWD)
Price : 7,000 kyats
Bus Pirate v3.6
(Part no : T-0010)
- Universal interface to (SPI, 1-Wire, I2C, SPI, JTAG, asynchronous serial (UART), MIDI, PC keyboard, HD44780 LCDs, and generic 2- and 3-wire libraries for custom protocols)
- USB interface, USB powered
- 1Hz-40MHz frequency measurement
- 10Hz-1MHz low-speed logic analyzer
- Bus traffic sniffers (SPI, I2C)
product information page
product demonstration
Price : 38,600 kyats
(Part no : T-0010)
- Universal interface to (SPI, 1-Wire, I2C, SPI, JTAG, asynchronous serial (UART), MIDI, PC keyboard, HD44780 LCDs, and generic 2- and 3-wire libraries for custom protocols)
- USB interface, USB powered
- 1Hz-40MHz frequency measurement
- 10Hz-1MHz low-speed logic analyzer
- Bus traffic sniffers (SPI, I2C)
product information page
product demonstration
Price : 38,600 kyats
ST-LINK/V2 - ICD/PROGRAMMER
(Part no : T-0009)
- 5V power supplied by a USB connector
- support STM8 and STM32 microcontroller families
- support both single wire interface module (SWIM) and JTAG/serial wire debugging (SWD)
datasheet link
product information page
Price : 44,000 kyats
(Part no : T-0009)
- 5V power supplied by a USB connector
- support STM8 and STM32 microcontroller families
- support both single wire interface module (SWIM) and JTAG/serial wire debugging (SWD)
datasheet link
product information page
Price : 44,000 kyats
COLINKEX
(Part no : T-0008)
- Support Cortex M0 and Cortex M3 Devices
- Support Software & JTAG Debugging
- Support CoFlash, CoIDE, MDK and IAR
user manual
list of supporting devices
Price : 29,000 kyats
(Part no : T-0008)
- Support Cortex M0 and Cortex M3 Devices
- Support Software & JTAG Debugging
- Support CoFlash, CoIDE, MDK and IAR
user manual
list of supporting devices
Price : 29,000 kyats
J-LINK EDU
(Part no : T-0007)
- educational version of J-LINK
- support ARM7/9/11, Cortex M0~M3 (please check with manual if you have doubt)
detail on this link.
Price : 110,000 kyats
(Part no : T-0007)
- educational version of J-LINK
- support ARM7/9/11, Cortex M0~M3 (please check with manual if you have doubt)
detail on this link.
Price : 110,000 kyats
DSO Nano v3
(Part no : T-0001)
- Portable and lightweight
- Color display
- 200Khz Analog Bandwidth
- Built-in Signal Generator
- Open Source
detail on this link.
Price : 150,000 kyats
(Part no : T-0001)
- Portable and lightweight
- Color display
- 200Khz Analog Bandwidth
- Built-in Signal Generator
- Open Source
detail on this link.
Price : 150,000 kyats
Saleae USB Logic Analyzer 24M 8CH
(Part no : T-0002)
- 8 channels input
- Sampling rate selectable at (24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz)
Price : 14,000 kyats
(Part no : T-0002)
- 8 channels input
- Sampling rate selectable at (24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz)
Price : 14,000 kyats
XMEGA Xprotolab
(Part no : T-0004)
- signal oscilloscope with an arbitrary waveform generator in a DIP module
- size : 1 x 1.6 inches (can be mounted directly on a breadboard)
- main CPU : ATXMEGA32A4U 36KB Flash, 4KB SRAM, 1KB EEPROM
- Graphic OLED display 0.96", 128x64 pixels
- 4 tactile switches
- 3 main functions:
Oscilloscope :
- 2 Analog Inputs
- Maximum Sampling rate: 2MSPS
- Analog Bandwidth: 200kHz/
- Input Voltage Range: -14V to +20V
Arbitrary Waveform Generator:
- 1 Analog Output
- Maximum conversion rate: 1MSPS
- Analog Bandwidth: 44.1kHz
- Resolution: 8bits
- Output current > +/- 7m
- Buffer size: 256
- Output Voltage: +/- 2V
Logic Analyzer specifications:
- 8 Digital Inputs, 3.3V level
- Maximum sampling rate: 2MSPS
- Frequency counter: 16Mhz
- Protocol Sniffer: UART, I2C, SPI
- Buffer size: 256
User Manual
YouTube link
Schematic, BOM, Code etc
Price : 66,000 kyats
(Part no : T-0004)
- signal oscilloscope with an arbitrary waveform generator in a DIP module
- size : 1 x 1.6 inches (can be mounted directly on a breadboard)
- main CPU : ATXMEGA32A4U 36KB Flash, 4KB SRAM, 1KB EEPROM
- Graphic OLED display 0.96", 128x64 pixels
- 4 tactile switches
- 3 main functions:
Oscilloscope :
- 2 Analog Inputs
- Maximum Sampling rate: 2MSPS
- Analog Bandwidth: 200kHz/
- Input Voltage Range: -14V to +20V
Arbitrary Waveform Generator:
- 1 Analog Output
- Maximum conversion rate: 1MSPS
- Analog Bandwidth: 44.1kHz
- Resolution: 8bits
- Output current > +/- 7m
- Buffer size: 256
- Output Voltage: +/- 2V
Logic Analyzer specifications:
- 8 Digital Inputs, 3.3V level
- Maximum sampling rate: 2MSPS
- Frequency counter: 16Mhz
- Protocol Sniffer: UART, I2C, SPI
- Buffer size: 256
User Manual
YouTube link
Schematic, BOM, Code etc
Price : 66,000 kyats